Researchers launched a novel single-step methodology for synthesizing nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs) embellished with iron (Fe) and copper (Cu) nanoparticles instantly on copper foil substrates.
Utilizing aerosol-assisted chemical vapor deposition (AACVD), they produced hybrid nanomaterials that mix the properties of carbon nanotubes (CNTs) with some great benefits of metallic nanoparticles.
A current examine revealed within the journal Nanotechnology detailed the synthesis and characterization of those supplies, highlighting their structural and electrochemical properties and potential purposes in electronics and power storage.
The Function of Carbon Nanomaterials
Carbon nanomaterials, primarily CNTs, have gained important consideration resulting from their wonderful electrical, mechanical, and thermal properties. These options make them helpful in electronics, power storage, and composite supplies.
Incorporating nitrogen into the CNT construction additional enhances their electrochemical efficiency, leading to nitrogen-doped CNTs (N-CNTs) that carry out even higher in units like supercapacitors and batteries. Nonetheless, optimizing synthesis situations stays a key problem for attaining high-quality N-CNTs with fascinating structural and practical traits.
Synthesis of Nitrogen-Doped Carbon Nanotubes
Researchers centered on synthesizing N-MWCNTs on copper foil substrates utilizing a single-step AACVD methodology with a precursor combination of benzylamine (C7H9N) and ferrocene (C10H10Fe). The experimental setup included a quartz tube reactor heated by a horizontal tubular furnace, with 40 cm-long copper foils serving as substrates.
The synthesis was carried out at 5 temperatures (750°C, 800°C, 850°C, 900°C, and 950°C) for 80 minutes underneath a managed argon-hydrogen fuel stream (1 L/min). This variation allowed the examine of how warmth affected the morphology and properties of the N-MWCNTs.
After synthesis, the samples have been characterised utilizing methods like scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and energy-dispersive spectroscopy (EDS). Moreover, ImageJ software program was used to investigate nanoparticle sizes, whereas electrochemical impedance spectroscopy (EIS) was used to judge capacitive conduct.
Structural and Compositional Outcomes
Temperature considerably influenced the morphology, composition, and electrochemical conduct of the N-MWCNTs grown on copper foils. At 750 °C, the fabric primarily consisted of multilayer graphene islands and Fe- and Cu-based nanoparticles encapsulated in graphitic carbon, with a couple of CNTs additionally current, indifferent from the copper substrate.
SEM photos confirmed skinny tubular buildings with a mean CNT diameter of roughly 8 nm and NP sizes of round 14 nm. EDS evaluation indicated atomic concentrations of carbon (C, 83.82%), Fe (10.94%), Cu (0.92%), and oxygen (O, 4.32%).
At 800 °C, the expansion shifted towards bamboo-shaped N-MWCNT bundles, with diameters starting from 5 nm to 40 nm and a excessive density of Fe and Cu nanoparticles. EDS confirmed optimum elemental composition with C (92.08%), Fe (5.59%), Cu (0.20%), and O (2.13%), suggesting environment friendly benzylamine decomposition and enhanced nitrogen incorporation. TEM confirmed that two distinct kinds of CNTs have been produced: thicker bamboo-shaped N-MWCNTs embellished with Fe nanoparticles and thinner CNTs probably catalyzed by Cu nanoparticles.
At 850-950 °C synthesis temperatures, bigger tubular-defective fiber-type carbonaceous aggregates (~500 nm) have been produced with fewer CNTs. EDS indicated fluctuating elemental concentrations, with pattern 950 exhibiting the very best Cu content material (5.74%) and the bottom Fe content material (2.88%).
Raman spectroscopy confirmed the graphitic nature of the synthesized supplies, displaying clear D, G, and 2D bands. The ID/IG ratio ranged from 0.79 to 0.88, indicating average structural dysfunction, whereas the G-band downshift prompt improved graphitization.
EIS indicated that N-MWCNTs synthesized at 800 °C exhibited promising capacitive conduct, with a cost switch resistance (Rct) of 1884 Ω and a double-layer capacitance (Cdl) of 1.07×10-1 Fcm-2, making them appropriate for power storage purposes.
In contrast, samples synthesized at 850 °C and 950 °C confirmed diffusion limitations and considerably decrease capacitance values, displaying that 800 °C offered essentially the most favorable stability of structural order and electrochemical efficiency.
Functions of N-Doped Carbon Nanotubes
The synthesized hybrid supplies have important potential to be used in power storage units, primarily supercapacitors. The N-MWCNTs synthesized at 800 °C demonstrated low charge-transfer resistance and excessive double-layer capacitance, indicating wonderful cost storage capability. Their nitrogen doping and ornament with metallic nanoparticles improved electrochemical efficiency, making them appropriate for versatile electronics.
A key benefit of this methodology is the direct development of N-MWCNTs on copper substrates, which eliminates the necessity for binders or present collectors and reduces interfacial resistance. This simplification may allow the creation of light-weight, environment friendly, and secure power units.
Past supercapacitors, these N-MWCNTs may additionally improve lithium-ion batteries and different quick cost–discharge programs. Their capability to fine-tune their construction and metallic nanoparticle content material gives alternatives for catalysis and sensing purposes.
Conclusion and Future Instructions
This analysis efficiently demonstrated the single-step AACVD synthesis of N-MWCNTs on copper substrates, highlighting the robust affect of synthesis temperature on the morphology, composition, and electrochemical properties of the ensuing nanomaterials. The optimum temperature of 800 °C produced bamboo-shaped N-MWCNTs embellished with Fe and Cu nanoparticles, displaying excessive carbon content material and wonderful capacitive conduct.
Future work ought to focus not solely on fine-tuning synthesis parameters and exploring different precursor mixtures but in addition on testing totally different substrate supplies and deposition situations, which may yield a greater diversity of hybrid nanomaterials with tailor-made properties.
Investigating substrate modifications and hybrid materials designs could develop electrodes with improved electrochemical conduct and purposes past power storage, comparable to sensing and catalysis.
Total, this examine presents key insights into the managed development of hybrid carbon nanomaterials and paves the way in which for progressive purposes in a broader subject.
Journal Reference
Padilla-Teniente, B, V., & et al. (2025). Copper foils as substrates for rising nitrogen-doped carbon nanotubes. Nanotechnology, 36, 365601. DOI: 10.1088/1361-6528/ae0042, https://iopscience.iop.org/article/10.1088/1361-6528/ae0042
